Specifications of typical standard fitout on a 55ft cruiser

£50,929

Many other layouts and designs available

Layout

        click on picture to show boat plan layout

Bedroom

The bedroom is located at the rear of the boat which is entered from outside onto a staircase that winds down to the starboard side. On top of the staircase to the port is the wet locker/airing cupboard with the calorifier below. The staircase has storage below with cupboard door access. At the bottom of the staircase to the port side is a full height wardrobe with four drawers below. On the portside the bed carcasses are constructed with removable tops for access to storage underneath with two large pull out drawers to the front. Supplied with sprung mattress. Above the bed is an overhead cupboard for storage. Privacy door leading from the bedroom into the rest of the boat. (optional extra).

Back to Top

Bathroom

The bathroom is on the port side fitted with vanity sink and storage cupboard below, 12v electric flush cassette toilet and 30"x24" tiled shower cubicle.

Back to Top

Corridor

In the corridor is a full height wardrobe giving storage for clothes for the occasional births.

Back to Top

Galley

The galley is on the port side and is of a half moon shape with fitted worktop. Fitted with stainless steel  sink and drainer. Stainless built in cooker and hob to match. Below the sink are two large storage cupboards and drawers between. Above at head height to the aft is an overhead storage cupboard and to the bow suspended above the worktop is a double sided glass fronted cabinet. To the starboard side of the galley directly under the side hatch is a narrow storage cupboard with two doors and two drawers above.

Back to Top

Dinette

The dinette is on the port side with bench seat to the aft and the bow with removable tops  for access to storage underneath. The table is in the middle which drops down to make up occasional birth. Supplied with upholstery to customers choice.

Back to Top

Lounge

The lounge is open plan. There is a TV unit and bookcase on the starboard side. On the port side is solid fuel Stove. L-Shaped fixed seating with storage below and removable table. (Optional extra).

Back to Top

Hull & Superstructure

Cruiser stern, fabricated in steel to 10/6/5/4mm thickness.
Rubbing strakes, welded both top and bottom. One full length plus quarter length fender.
Decks, all self draining.
Weed hatch, quick release.

Back to Top

Ballast

2" concrete flags with felt underlay.

Back to Top

Floors

Floors are constructed from 18mm exterior grade plywood, the underside and edges painted with bitumen.

Back to Top

Insulation

Polyurethane sprayed foam insulation class 1 BS476 part 7:1987.

Back to Top

Windows

Toughened glass, gold anodized frames with drop back vents.

2x12"Portholes           Bedroom.
2x12"Portholes           Bathroom and corridor.
1x36"Window            Galley with the side doors opposite. (Side doors extra).
2x36"Windows           Dinette.
2x36"Windows           Saloon.

Back to Top

Water Tank

The water tank is integral type under the fore deck which holds approx 120 gallons. The tank is painted with a potable grade coating. An inspection hatch is fitted in the fore deck to allow access.

Back to Top

Interior Linings & Bulkheads

The cabin sides and roof are lined with oak veneered plywood and trimmed with styling trims executed in sapele hardwood, which is chosen to provide contrast. Bulkheads are constructed from 19mm oak veneered panels.

Back to Top

Front Cabin Doors

Double doors constructed from solid sapele, 2/3rds glazed with laminated glass, 1/3 raised fielded panel. Fitted with 5 lever security deadlock and brass furniture. Finished with three coats of yacht varnish.

Back to Top

Stern Doors

Double doors with sliding hatch constructed from steel, interior lined with oak veneered panels and brass furniture.

Back to Top

Fixings

All Screws and Fixings will either be brass, stainless steel or zinc plated steel to prevent rust and to ease later extraction if necessary.

Back to Top

Cabin Heating

Solid fuel stove in lounge. Heating can also be provided by Eberspacher Hydronic DW5 diesel water heater, supplying three 800mmx600mm radiators and a towel rail. Includes 7 day programmer and frost stat protection. (Optional extra).

Back to Top

Water Heating

Water will be heated by propulsion engine coolant and from the Eberspacher water heater if fitted. Heated water will be stored in a twelve gallon vertical calorifier in airing cupboard.

Back to Top

Water Pipes and Connections

Pipe work and connections are executed in Hep2o as this is less susceptible to frost damage than copper.

Back to Top

Water Pump

The water pump is a diaphragm type pump with integral pressure switch, complete with 5ltr accumulator tank.

Back to Top

Toilet

The toilet is a thetford 12v electric flush cassette toilet.

Back to Top

Internal Fittings

Carpets, curtains, upholstery, tiles & work surfaces chosen to customer specification.

Back to Top

Engine & Gearbox

Isuzu 35:

4 cylinder 1500cc, 35hp engine, keel cooled. Newage PRM 120 mechanical gearbox, supplied with standard control panel. Twin 80amp Alternators. Centre Flex Coupling (on 1 ½” Tube).

Back to Top

Diesel Tank

The diesel tank is approx 40 gallons.

Back to Top

Electrics

12V

Cabin electrical services are supplied by two - 12 volt 110 amp hour batteries, charged by the 2nd engine alternator. All wiring will be heavy gauge multi-strand cable. All circuits will be designed to produce less voltage drop than required for CE certification. Individual circuits are distributed via a 10-way consumer unit which are protected by miniature circuit breakers. The control panel has a built in altimeter to enable you to check state of the batteries. Heavy duty master switches will be fitted with removable keys.

Back to Top

240V

240V electrical services are supplied by landline hook-up as standard. Protected by 16amp RCD, supplying four double brass recessed sockets.

Back to Top

Cabin Lighting

Individually switched brass framed with teak base 12v halogen roof lights in each cabin. Brass downlights under all overhead cupboards and wall lights in lounge and dining room.

Back to Top

Ventilation

Five brass mushroom vents are fitted over the appropriate rooms down the length of the boat. Brass louvered vents are fitted to the front and rear doors.

Back to Top

Paint Scheme & Specification

Exterior paint work in two colours with coach lines and fully “blacked” below top strake.  Roof, gunwales, fore and aft decks all have non-slip surfaces.

Back to Top

Safety

Three fire extinguishers, fire blanket, safety signs as required.

Back to Top

EU RCD

All boats are built to the Recreational Craft Directive and come complete with boat manual and CE plate.

Back to Top

Warranty

All new boats built will be supplied with full two years warranty.

Back to Top
 

We reserve the right to alter specifications and design without prior notice